5511 Tomken Road. Unit #1

Mississauga, Ontario L4W 4B8

905-602-2033

Phone

Mon - Fri: 8:30am - 5pm

Hours

5511 Tomken Road. Unit #1

Mississauga, Ontario L4W 4B8

905-602-2033

Phone

Mon - Fri: 8:30 - 5

Hours

Fastener Seals

Fastener Seals

Fastener seals are used to seal the leak path on the shoulder of fasteners, and are designed so that after the fastener has been tightened the pre-determined interference between the fastener and the seal will cause the rubber to seal the clearance gap between the fastener and the mating components. Standard fastener seals are 70-durometer NBR with zinc plated low carbon steel. Different material combinations are available upon request.

Fastener Seal Dimensions
Part No. Fastener Size Seal I.D. (in) Seal O.D. (in) Retainer Thickness (in) Rubber Thickness (in)
600-6 #6 0.130 0.385 0.040 0.050
600-8 #8 0.156 0.385 0.040 0.050
600-10  #10 0.180 0.443 0.050 0.072
600-0250  1/4 0.240 0.505 0.050 0.072
600-0312  5/16 0.301 0.603 0.050 0.072
600-0375  3/8 0.364 0.666 0.047 0.072
600-0437  7/16 0.426 0.752 0.047 0.072
600-0500  1/2 0.490 0.880 0.050 0.072
600-0562  9/16 0.552 1.067 0.050 0.072
600-0625  5/8 0.614 1.193 0.047 0.072
600-0750  3/4 0.740 1.322 0.059 0.096
600-0875  7/8 0.863 1.510 0.059 0.096
600-1000 1 0.988 1.760 0.064 0.096

Thread Seals

Thread seals are reuseable, safe, reliable seals for threaded devices. Their design is unique… the first and only seal recommended for sealing directly against threads. They are self-centering, non-directional and are low in original cost; can provide considerable savings because they make possible the use of low cost standard fasteners and full threaded fittings.

Standard thread seals are 70-durometer NBR with zinc plated low carbon steel. Different material combinations are available upon request.

Threaded Seal Dimensions
Part No.Fastener
Size
Seal O.D. (in)Metal
Thickness (in)
Rubber
Thickness (in)
7500-6#60.4060.0500.078
7500-8#80.4060.0470.070
7500-10#100.4690.0500.086
7500-02501/40.5620.0500.092
7500-03125/160.6870.0500.108
7500-03753/80.7500.0640.113
7500-04377/160.9060.0780.136
7500-05001/21.0000.0780.140
7500-05629/161.0940.0980.174
7500-06255/81.1870.0980.142
7500-07503/41.3750.1180.190
7500-08757/81.5620.1090.198
7500-100011.7500.1180.265

Bonded Seals

Bonded Seals are used to seal the leak path on the shoulder of fasteners. Bonded Seals are designed so that after the fastener has been tightened the pre-determined interference between the fastener and the seal will cause the rubber to seal the clearance gap between the fastener and the mating components.

Listed below are the most common style and sizes of Bonded Seals (English Metric), also available are the German Metric, French Metric, Cetop and Self-Centralising.

Bonded Seal Dimensions (English Metric)
Part No.BSPBolt SizeA
=0.13/-0.00
B
+-0.13
C
+-0.13
E
BS-001*6BA6.354.093.051.22/1.37
BS-002*4BA7.265.264.12 
BS-003*2BA8.386.355.21 
BS-004*1/413.218.006.86 
BS-005*1/413.349.536.99 
BS-006 5/1613.349.538.31 
BS-007 5/1614.2210.048.64 
BS-0201/83/815.8811.8410.372.03/2.18
BS-008*0.418.3612.4511.26 
BS-009*7/1619.0513.0811.69 
BS-0211/41/220.5715.2113.74 
BS-010*9/1622.2316.3914.86 
BS-022*0.622.2317.3015.83 
BS-011*5/825.4018.7516.51 
BS-0233/8*23.8018.7517.28 
BS-012*11/1625.4019.6918.162.34/2.60
BS-024*3/426.9221.2119.69 
BS-0251/213/1628.5823.0121.54 
BS-0265/87/831.7524.9723.49 
BS-013*15/1633.2726.0424.26 
BS-0273/4134.9328.5327.05 
BS-028*1 – 1/1638.6130.6127.82 
BS-014*1 – 1/836.5830.8629.33 
BS-0297/91 – 3/1638.1032.2930.81 
BS-015*1 – 1/441.4035.6932.643.25/3.51
BS-03011 – 5/1642.8036.8833.89 
BS-03111 – 5/1642.8036.8033.89 
BS-016*1 – 3/844.4538.9935.94 
BS-017*1 – 1/247.7542.0438.96 
BS-0321 – 1/41 – 5/852.3845.9342.93 
BS-018*1 – 3/457.1548.3945.34 
BS-0331 – 1/21 – 7/858.6051.3948.44 
BS-0341 – 3/42 – 1/869.8558.3054.89 
BS-0362*73.0363.6360.58 
Scroll to Top