Fastener Seals
| Fastener Seal Dimensions | ||||||
|---|---|---|---|---|---|---|
| Part No. | Fastener Size | Seal I.D. (in) | Seal O.D. (in) | Retainer Thickness (in) | Rubber Thickness (in) | |
| 600-6 | #6 | 0.130 | 0.385 | 0.040 | 0.050 | |
| 600-8 | #8 | 0.156 | 0.385 | 0.040 | 0.050 | |
| 600-10 | #10 | 0.180 | 0.443 | 0.050 | 0.072 | |
| 600-0250 | 1/4 | 0.240 | 0.505 | 0.050 | 0.072 | |
| 600-0312 | 5/16 | 0.301 | 0.603 | 0.050 | 0.072 | |
| 600-0375 | 3/8 | 0.364 | 0.666 | 0.047 | 0.072 | |
| 600-0437 | 7/16 | 0.426 | 0.752 | 0.047 | 0.072 | |
| 600-0500 | 1/2 | 0.490 | 0.880 | 0.050 | 0.072 | |
| 600-0562 | 9/16 | 0.552 | 1.067 | 0.050 | 0.072 | |
| 600-0625 | 5/8 | 0.614 | 1.193 | 0.047 | 0.072 | |
| 600-0750 | 3/4 | 0.740 | 1.322 | 0.059 | 0.096 | |
| 600-0875 | 7/8 | 0.863 | 1.510 | 0.059 | 0.096 | |
| 600-1000 | 1 | 0.988 | 1.760 | 0.064 | 0.096 | |
Thread Seals
Thread seals are reuseable, safe, reliable seals for threaded devices. Their design is unique… the first and only seal recommended for sealing directly against threads. They are self-centering, non-directional and are low in original cost; can provide considerable savings because they make possible the use of low cost standard fasteners and full threaded fittings.
Standard thread seals are 70-durometer NBR with zinc plated low carbon steel. Different material combinations are available upon request.
| Threaded Seal Dimensions | ||||
|---|---|---|---|---|
| Part No. | Fastener Size | Seal O.D. (in) | Metal Thickness (in) | Rubber Thickness (in) |
| 7500-6 | #6 | 0.406 | 0.050 | 0.078 |
| 7500-8 | #8 | 0.406 | 0.047 | 0.070 |
| 7500-10 | #10 | 0.469 | 0.050 | 0.086 |
| 7500-0250 | 1/4 | 0.562 | 0.050 | 0.092 |
| 7500-0312 | 5/16 | 0.687 | 0.050 | 0.108 |
| 7500-0375 | 3/8 | 0.750 | 0.064 | 0.113 |
| 7500-0437 | 7/16 | 0.906 | 0.078 | 0.136 |
| 7500-0500 | 1/2 | 1.000 | 0.078 | 0.140 |
| 7500-0562 | 9/16 | 1.094 | 0.098 | 0.174 |
| 7500-0625 | 5/8 | 1.187 | 0.098 | 0.142 |
| 7500-0750 | 3/4 | 1.375 | 0.118 | 0.190 |
| 7500-0875 | 7/8 | 1.562 | 0.109 | 0.198 |
| 7500-1000 | 1 | 1.750 | 0.118 | 0.265 |
Bonded Seals
Bonded Seals are used to seal the leak path on the shoulder of fasteners. Bonded Seals are designed so that after the fastener has been tightened the pre-determined interference between the fastener and the seal will cause the rubber to seal the clearance gap between the fastener and the mating components.
Listed below are the most common style and sizes of Bonded Seals (English Metric), also available are the German Metric, French Metric, Cetop and Self-Centralising.
| Bonded Seal Dimensions (English Metric) | ||||||
|---|---|---|---|---|---|---|
| Part No. | BSP | Bolt Size | A =0.13/-0.00 | B +-0.13 | C +-0.13 | E |
| BS-001 | * | 6BA | 6.35 | 4.09 | 3.05 | 1.22/1.37 |
| BS-002 | * | 4BA | 7.26 | 5.26 | 4.12 | |
| BS-003 | * | 2BA | 8.38 | 6.35 | 5.21 | |
| BS-004 | * | 1/4 | 13.21 | 8.00 | 6.86 | |
| BS-005 | * | 1/4 | 13.34 | 9.53 | 6.99 | |
| BS-006 | 5/16 | 13.34 | 9.53 | 8.31 | ||
| BS-007 | 5/16 | 14.22 | 10.04 | 8.64 | ||
| BS-020 | 1/8 | 3/8 | 15.88 | 11.84 | 10.37 | 2.03/2.18 |
| BS-008 | * | 0.4 | 18.36 | 12.45 | 11.26 | |
| BS-009 | * | 7/16 | 19.05 | 13.08 | 11.69 | |
| BS-021 | 1/4 | 1/2 | 20.57 | 15.21 | 13.74 | |
| BS-010 | * | 9/16 | 22.23 | 16.39 | 14.86 | |
| BS-022 | * | 0.6 | 22.23 | 17.30 | 15.83 | |
| BS-011 | * | 5/8 | 25.40 | 18.75 | 16.51 | |
| BS-023 | 3/8 | * | 23.80 | 18.75 | 17.28 | |
| BS-012 | * | 11/16 | 25.40 | 19.69 | 18.16 | 2.34/2.60 |
| BS-024 | * | 3/4 | 26.92 | 21.21 | 19.69 | |
| BS-025 | 1/2 | 13/16 | 28.58 | 23.01 | 21.54 | |
| BS-026 | 5/8 | 7/8 | 31.75 | 24.97 | 23.49 | |
| BS-013 | * | 15/16 | 33.27 | 26.04 | 24.26 | |
| BS-027 | 3/4 | 1 | 34.93 | 28.53 | 27.05 | |
| BS-028 | * | 1 – 1/16 | 38.61 | 30.61 | 27.82 | |
| BS-014 | * | 1 – 1/8 | 36.58 | 30.86 | 29.33 | |
| BS-029 | 7/9 | 1 – 3/16 | 38.10 | 32.29 | 30.81 | |
| BS-015 | * | 1 – 1/4 | 41.40 | 35.69 | 32.64 | 3.25/3.51 |
| BS-030 | 1 | 1 – 5/16 | 42.80 | 36.88 | 33.89 | |
| BS-031 | 1 | 1 – 5/16 | 42.80 | 36.80 | 33.89 | |
| BS-016 | * | 1 – 3/8 | 44.45 | 38.99 | 35.94 | |
| BS-017 | * | 1 – 1/2 | 47.75 | 42.04 | 38.96 | |
| BS-032 | 1 – 1/4 | 1 – 5/8 | 52.38 | 45.93 | 42.93 | |
| BS-018 | * | 1 – 3/4 | 57.15 | 48.39 | 45.34 | |
| BS-033 | 1 – 1/2 | 1 – 7/8 | 58.60 | 51.39 | 48.44 | |
| BS-034 | 1 – 3/4 | 2 – 1/8 | 69.85 | 58.30 | 54.89 | |
| BS-036 | 2 | * | 73.03 | 63.63 | 60.58 | |